Sensi HDPE Black/White
Sensi HDPE Purple/Yellow
Sensi conversion frame for fans of micro brushless flight.Specially designed for 65mm props but you can use whatever you have to hand or just swap over your current brushless whoop. I recommend 6000 - 8000KV 11xx sized motors if you do use 65mm props. This frame is a collaboration between Drone Junkie and Ragge designs.
I am not a fan of ducts (shrouds really) and dont see the need for them in this class of micro flight. That said I do have plans for a bumper that will fit in the outside holes on each arm (Keep an eye on the FaceBook page for more news on this). There is a great benefit to flying without restriction and proper balance.
We currently do not have a canopy designed for the frame so we are releasing it without one at a slightly lower price. I include a selection of bolts so you can use what suits your conversion best. I use the small foam pad under the frame to keep my lipo in place with its elastic bands.
Sensi Frame (either Carbon or HDPE)2 x 8mm M2 round head Allen bolt2x 10mm M2 round head Allen bolt2x 12mm M2 round head Allen bolt2x 15mm M2 round head Allen bolt4x Hex nut M24x Locknut M21x Foam Square
This picture shows the correct forward direction (top = front) notice the rotated motor holes, this will lead the wires down the arms to the middle of the frame for plugging into motors. The 4 inner mounting holes are the same as 65 and 75 frames so you can fit whatever fc you have from that series of drones. The outer 4 holes are the same as many 85 sized HD drones so if you wanted a HD Sensi there are many options for camera pods like these on Thingiverse. The 4 holes on the very tips of the arms are for a later development for bumpers.