THIS IS NOT A TOY !
Are you ready?
For these beautifully crafted hobby grade crawlers?
The Orlandoo OH35A03 1/32 Micro Crawler Kit is an incredibly capable micro size scale crawler. This micro sized kit includes a extremely well detailed Land Rover Defender hard plastic body, super soft scale tires, scale axles and six spoke mag wheels.
Don't let the micro size fool you!
This little crawler is equipped with four-link suspension, friction shocks on all four corners and enough axle articulation to make this tiny truck a true performer.
The OH35A03 is an un-assembled hobby grade kit, and requires servo, ESC, motor and battery for completion. We recommend you choose Orlandoo Hunter components to complete the package. To steer you will need one 2.2g micro digital servo, one Orlandoo micro motor, a 240mAH 2S LiPo battery, one PCB/LED/ESC board and a minimum of 3 channel radio system.
Some building experience is recommended.
These are listed either as the standalone kit with no electronic components, or equipped with the components and the only items needed for completion would be a 5 Channel transmitter and receiver and a 2S LiPo battery.
For those of you that choose with electronics, we will be sending these out with the stock 150 speed motor, as recommended by the manufacturer.
However at no extra cost we are offering you the option for the 200 or 500 speed motor.
More speed = less torque
Choose as you would for the course you plan
Note : If you would like the faster motors please add a note to your order telling us what speed you require!
Features:
Detailed hard plastic scale body
Micro size perfect for home or office use
Full time shaft drive 4WD
Super grippy scale tread pattern tires
Included building tools
Realistic 4-Link suspension
Friction dampers
Specifications:
Length: 126mm
Width: 57mm
Height: 63mm
Tread: 50mm
Wheelbase: 77mm
Needed To Complete if you choose no electronics:
2.2g Micro Digital Servo
Orlandoo Hunter Motor w/reduction gear
PCB/LED/ESC Board
7.4V 2S 240mAh LiPo Battery
2-5 Channel Radio System (transmitter & receiver)
AA Batteries for Transmitter
Plastic Model Paint (for body)
Needed To Complete if you choose with electronics:
7.4V 2S 240mAh LiPo Battery
2-5 Channel Radio System (transmitter & receiver)
AA Batteries for Transmitter
Plastic Model Paint (for body)

NOTES:
- Kit assembly may require a few holes to be drilled and some parts may need to be slightly sanded or trimmed to get a perfect finish. First time builders should not attempt assembly without the guidance from an experienced modeler.
- Complete and painted truck shown for illustrative purposes only. Assembly and painting required.
- We highly recommend you purchase this specific 0.9mm Allen Screw Driver for easier building.