Orlandoo Hunter Spares

Orlandoo Hunter
Earn 0 reward points
£0.00 £1.99
L
In stock, ready to dispatch

Spares

QTY:
Out Of Stock
Add To Wishlist

Here's a list of all current available spares for the Orlandoo Hunter series!

Purchased directly from the Manufacturers, you can rest assured these Spare Parts are the highest quality and complete Hobby Grade for the 1/35th scale models.


Steering Rod Dual Ball Joint For OH35P01 OH35A01 - TA0012

This is the Orlandoo Steering Rod Dual Ball Joint Silver For the OH32A02 OH35A01.

Metal Axle Gear for Orlandoo Hunter Jeep Rubicon - TA0024

Metal Axle Gear for Orlandoo Hunter Jeep Rubicon. 
Supplied with the o-ring and pin.

7.4V 2S Lipo Balance Charger - YS0002

This charger is only for the stock 2s lipo battery, connect charger to any USB port for on the Go charging!

For safety please remove the battery after finishing charging, always charge lipo battery with an approved lipo battery charger.

Metal Gearbox Gear - TA0023

Here's the metal gearing for the transmission. 
Comes supplied with the two grub screws for installation.


Replacement 2.2g servo for maximum torque - AS0022

Orlandoo 2.2g Low Voltage Digital Servo (
OH35P01)

Low voltage lightweight digital servo with plastic gears for the Orlandoo Hunter Motors 1/35 micro crawler.

This is a low voltage servo, it has the correct connection for plug and play.

Note: Do not use with an operating voltage higher than 4.2V, or risk damaging the servo.

Specifications:
Size: 14X6.2X17.9mm
Weight: 2.2g
Operating voltage: 2.8V-4.2V (No more than 4.2 V)
Operating speed: 0.06s/60°2.8V 0.05s/60°3.7V
Torque value: 0.06Kg/2.5V 0.075Kg/3.7V
Gear type: plastic
Connector: mini JST
line length: 10cm

Stock 150 Motor - NS0150

DC: 6V 12000RPM±5%   1:100  Output speed 150 RPM 

This is the motor to use if you want High Torque and low speeds. However faster motors (200&500) are available to purchase under our 'Upgrades' Section HERE.
Note : Faster motors = less torque

Control board for F150 & Hunter Jeep PCB/ESC/LED lights - TS0001

PCB board with included ESC for the Orlandoo Hunter Motors 1/35 micro crawler.

Control the provided running lights with a spare channel on your receiver without the need external switches. Includes outputs for micro low voltage servo and 2x 5V lights.

Kit comes complete with everything required, including three 4mm white LEDs. A diagram is also provided for easy installation.

Specifications: Working voltage: 4.8-9.6V
Input Signal Type: PWM
driving frequency: 250Hz
Servo signal range: 1ms-2ms
Output Current: 5A
Size: 23x22x7mm

Compatible with the following:
OH35P01 (F150 1/35 Micro Crawler Kit)
OH35A01 (Hunter Jeep 1/35 Micro Crawler Kit) 

Orlandoo 1/35 OH35A01 Screw Kit Parts Set - SA0024

Orlandoo Hunter Wrangler Rubicon Screw KIT Parts For OH35A01
Useful to have a spare set as these small screws are easily lost!

Orlandoo 1/35 OH32A02 Screw Kit Parts Set - SA0012

Orlandoo Hunter Mitsubishi Pajero Screw KIT Parts For OH32A02.

Orlandoo Roof Rack for Orlandoo 1/32 Pajero OH32A02 - SA0035

A replacement Roof Rack/ladders and accessories for the Pajero OH32A02

Orlandoo Hunter Model Plastic Rod Head - TA0001

Spare replacement Rod heads for your Orlandoo Hunter.

Orlandoo 1/35 OH35P01 Damper Set of 4 - TA0003

Replacement damper set for your 1/35 Orlandoo Crawler!

Steering Rod Ball Joint - TA0011

Replacement steering rod single ball joints for OH32A02 OH35A01. Supplied with 13 ball joints in each pack.

Wrangler Body for Orlandoo Hunter Model Orlandoo Hunter - SA0022

Replacement body parts for your Orlandoo OH35A01 Wrangler Body!

Pajero Body for Orlandoo Hunter Model Orlandoo Hunter - SA0028

Replacement body parts for your Orlandoo OH32A02 Pajero Body!

Orlandoo Hunter OH32A02 Window - SA0027

Orlandoo Hunter OH32A02 Window. Package includes replacement OH32A02 Pajero window.

Orlandoo Hunter 35P01 Cab - SA0001

Orlandoo Hunter 35P01 Cab. This is the replacement cab for the Orlandoo 35P01 F150 kit. This body is a great option if you already have a 35P01 F-150, but want another body for a custom paint job, or maybe customise the fenders or build a custom truggy! Package includes cab only.

Needed to Complete: 

  • OLHSA0002 Bed
  • OLHSA0009 Front Bumper
  • OLHSA0010 Rear Bumper
  • OLHSA0003 Body Details (grill, windshield wipers, rear view mirrors)
  • OLHSA0004 Window 
  • OLHSA0005 Light Lenses

Window Glass Replacement For OH35A01 - SA0021

Orlandoo Hunter Model Orlandoo Hunter Model Orlandoo Hunter Jeep Rubicon Body Window Glass Replacement For OH35P01

Orlandoo Hunter 35P01 Bed - SA0002

Orlandoo Hunter 35P01 Bed. This is the replacement cab for the Orlandoo 35P01 F150 kit. Package includes plastic hard body bed.  

2x5x2 Bearing for Motors - TA0009

Here are some replacement bearings for your motors. These come supplied as a pack of 5.

3x6x2 Bearings for Wheels - TA0010

These are the replacement bearings for your Wheel Hubs. These come supplied as a pack of 4.

Orlandoo Hunter 35P01 Link Set - SA0011

Orlandoo Hunter 35P01 Link Set. This is the replacement Orlandoo 35P01 link set. Package includes front and rear upper links, front and rear lower links, steering drag link and steering servo link.

Orlandoo Hunter 35A01 Link Set - SA0023

Orlandoo Hunter 35A01 Link Set. This is the replacement Orlandoo 35A01 Jeep link set. Package includes front and rear upper links, front and rear lower links, steering drag link and steering servo link.

Special Bridge Metal Umbrella Teeth for OH35P01 - TA0033

This is the replacement axle gear for the F-150 Pickup Truck.
Note: This will not fit on the OH32A02 and OH35A01




The item has been added to your basket

Continue Shopping
Proceed To Checkout