NOTE : These need a special HV capable charger.
For best results DO NOT use a normal charger for these HV Lipos.
Yes HV is here.
These are the first HV Lipos in this size and are astonishing for power deliverance.
They work great and your original Tiny Whoop will become a TANK!.
other than a decent power lead the mcpX (PW) lead is a perfect fit.
What a great company MyLipo is for taking note of what we want and producing high quality power packs for us to enjoy.
ATTENTION
HV Lipo LOCKING VOLTAGE 4.35V
Technical specifications:
Voltage: 3,8V
Capacity: 230mAh at 4.35V (about 205mAh at 4.2V)
Weight: 5.5-5.6g
Dimensions 51 x 11 x 5.5mm
Fits perfectly into the original battery holder
Configuration 1S1P
Max continuous load 25C = 5.12A
Short-term load 50C = 10.25A
No balancer connection, as single cell
Charge 3C = 0.62A when it must be fast
(Our recommended charging rate is 1C = 0,2A)
Supplied with mcpX Connector
THE new HV development developed for the TinyWhoop, Inductrix,
idea by Jesse Perkinns (TinyWhoop Inventor)
ATTENTION
This Lipo has mcpX(PW) plug, you will need the mcpX Socket to use this Lipo
WARNING : Do Not try to charge normal 4.2v Lipos with a HV charger ! It is NOT recommended, These Yellow Cap HV Lipos have a special chemistry that the normal Lipos dont have.
Advisory: You will need the mcpX Socket to use this Lipo
Note : Any Lipos that have been used with the LVC mod WILL NOT be accepted for ANY warranty. The MOD is not a good idea and should NOT be done on your quad.