Introducing the next generation of not a Micro, not a Nano, but a Pico sized flight controller!
At 23 x 25mm its small but more powerful than any other FC out there!
Fabricated on a 4 layer PCB with dedicated power and ground planes combined with >10A FET's makes for an incredibly powerful and agile flight controller.
Features:
Cleanflight and Betaflight firmware compatible
22.5 x 25mm
2.25g
Single side populated (for super easy mounting)
MPU6050
Brushed motor support for 4 motors (all populated with fets)
M5 and M6 broken out (used when converting into a HEX)
8A N Channel fets (10A <5secs)
Flight battery voltage monitoring
Spektrum Satellite (3.3V) or PPM (VBATT) RX input
Spektrum bind button (hold on boot to bind)
Many pads broken out for mods
5V Buck/Boost regulator (no brownouts)
3.3V regulator powered from 5V
1S (4.2V) only
Battery can be connected at same time as USB for testing (when battery is not connected, the motors will NOT spin. USB does not provide power to motors)
WS2812B LED solder pad
Buzzer led for low battery alarm
Buzzer transistor either for physical buzzer or an LED
Connectors all around edge and on both sides with labels
Includes:
PICO-B-FC v1.0
Spek Sat cable
JST power cable (cut to length, strip wires, solder to FC)
Serial Cable Adapter
Shopping List:
Micro Buzzer
Brushed frame
Brushed motors ( Coreless Brushed Motor CL-0820)
Propellers
Satellite receiver (e.g. OrangeRX R100 or LemonRX)
Battery (300-700mAh)
USB serial adapter
Double sided foam pads
Documentation:
The product user manual can be found here.
Accessories:
Included Accessories 1x 2pin JST power cable, 1x 4pin to FTDI (Serial cable), 1x 3pin RX cable (spek sat)
Electrical Characteristics
Input Voltage 3-5v (1S LiPo)
Output Voltage 5V, 3.3V
Flight Controller Features
Board Type Brushed (4x integrated 8A N-FETs)
Compatible Firmware Cleanflight, Betaflight
Motor Outputs 4
Processor Type STM32F303
Sensors MPU6050 (Acc + Gyro)
Physical Attributes
Length 25mm
Width 22.5mm
Height 4mm
Weight 2.25g