This 2S powerhouse has the ability to fly real acro, but is still small enough, safe enough, and quiet enough to fly anywhere.
Please Note: We highly recommend using an XT30 pigtail instead of using the 2x 1s configuration. We've found that the 1s HV lipo's get too hot and are getting damaged after just a couple weeks of use.
If you would like the DSMX version, please contact us! We are happy to solder on the other DSMX receiver onto the flight controller at the cost of the receiver. CLICK HERE for Receiver price.We will be getting 7.4v 333mah Lipo's fitted with an XT30 just for these whoops. All you have to do is swap the pigtail to an XT30 and cut the middle tab in the battery tray of the Beta65x
Is this what we've all been waiting for? The power of a 5 inch racing quad in the size of a Tiny Whoop?
With the high performance STM32F405 processor this quad feels silky smooth in the air. The Flight Controller is flashed with Betaflight Ominibus 3.5.0 firmware.
A total weight of 29g give pilots a good balance of weight and a nice punch on the 2S battery.
The whole quad is completely assembled, no soldering or tinkering required. These are the lightest 0802 17500KV motors with cable connectors you can get. Just plug and play, set your arm switches in Betaflight and away you go!
For durability, the motor shafts are 1.0mm in diameter, so you must drill out your Original Tiny Whoop props to fit these motors. We will be selling the small drill bits soon!
TWO IMPORTANT NOTES! - This Whoop uses two of your original Tiny Whoop batteries in series to make it a 2s pack. You must use the same capacity battery when flying, for example DO NOT use a 205mAh and a 255mAh together to fly, they must be of the same capacity or you will damage the lower rated Lipo! Secondly, this VTX can output on certain channels which may not be Legal in some countries. Please familiarise yourself with the laws before flying and ensure you are on the appropriate channel and output power.
4 in 1 ESC:
Z02 AIO Camera VTX :
PROPS OUT :
The Beta65X also comes with "props out" in default. Why do we need "props out" direction?
In the default Betaflight props direction (Props in), the quadcopter dips and "washes out" in hard corners. With reversed props or "props out", no more dipping even in hard cornering!
Power Cable :
There is only one option for the Beta65X battery - PH 2.0, the standard Tiny Whoop connector. Any Tiny whoop battery that currently fits the cockroach or stock unductrix frames will fit, BetaFPV supplies two 260mAh lipo's but you can still use our MyLipo 255/205 packs.
Z02 AIO Camera/VTX
The AIO camera VTX on the Beta75X is a custom version of the Z02. The VTX board and camera board are split and a 35 degree camera mount for fast flying. At the same time, it has all the other functions of the Z02 camera, like output power switchable between 0mW (Pitmode), 25mW and 200mW. Smart audio is available for VTX remote control in default.
Here you can download the STL file for the camera mount.
View Product Video