BeeBrain V2 FPV Flight Controller Set

NewBeeDrone
BBV2 flight controller set
Earn 80 reward points
£0.00 £79.99
L
In stock, ready to dispatch

TX Type

QTY:
Out Of Stock
Add To Wishlist

The BeeBrain v2

The most advanced micro quad flight controller for your AcroBee/DIY micro quad/TinyWhoop. 

Quick build video, check it out HERE

The manual can be found HERE (we are still finishing up some sections)

**PLEASE USE THE HEX FILES LOCATED BELOW, THESE ENABLE MORE FEATURES THAN THE ONES AVAILABLE ON BETAFLIGHT** 

Newest Frsky Hex file can be found HERE

Newest DSMX Hex file can be found HERE

 

Note : you will need connect to your PC in order to set your tx switches and other factors. (This step is a little involved and will need drivers for your PC)
We produced a guide to help you through this step found here. 
(note : clicking the link will start downloading a word doc)

The first generation BeeBrain was released in the fall of 2016. We saw the possibilities that the Tiny Whoop platform opened up. In order to increase customization and include the ability to tweak and tune to each individuals flying style, we introduced the worlds first cleanflight/betaflight ready, Frsky/DSMX native flight controller for the TinyWhoop style quad. 

Now, the NewBeeDrone team is proud to bring you the BeeBrain V2. As more pilots increase their skills, the confines of indoor flying are just that, too confining. Backyard and park flying has become just as popular. A new faster F3 processor allows for better handling under breezy conditions. More powerful and efficient MOSFETs give you the power you need to haul indoors and the ability to fly in breezy conditions outdoors. More speed, more power, more agility, more fun.

To take it one step further and make the whole set more beginner friendly, we developed our own VTX/OSD board that allows full control over the FC settings as well as the VTX settings via an intuitive on-screen display menu. We have also eliminated soldering from the setup of the v2, it's all plug and play. For the full experience, we recommend the full Beebrain v2 stack.

 Features:

 Flight Controller:

Compatible with Frsky (D8 with hub telemetry)/DSM (2 and X)
STM32F303 Processor
MPU6500 Gyro/Accelerometer via SPI
4 x 30A Mosfets (Pulsed)
Onboard Antenna (Indoor range)
Transponder Driver
Battery Monitor
1 x RGB LED (non-programable status light)
JST PH-2.0 Power Lead


VTX & OSD:

BetaFlight OSD
VTX configurable on OSD (40 channels, 1-25 mw)


Camera:

600 TVL
120 Degree Viewing Angle
20 Degree Mount
 

Specifications:  

Flight Controller Size: 26mm x 26mm
Flight Controller Weight: 3.5g
Whole Set with VTX and Camera weight: 9.5g
Power Source: 1S Lipo battery 
(MyLipo 255/205HV Yellow Cap HIGHLY RECOMMENDED)

What's in the package:

BeeBrain V2 Flight Controller, BeeTx, and BeeEye Camera
Rubber Grommets and Mounting Screws
Silicone bands

 

Read the Oscar Liang Review here


View Product Video




The item has been added to your basket

Continue Shopping
Proceed To Checkout