Please Note we are no longer able to ship via Royal Mail (Until further notice) as they have shut all drop off points. DPD shipping has now been reduced to £5 from £5.75
We use these Prewired LED's to add the finishing touch to our edition of the world famous Tiny Whoop Racer.
Its a relatively simple job to push the 4 LED's off the bottom of the stock inductrix flight controller with a hot soldering iron and replace them with these prewired super bright ones.
Ensure polarity is correct, arrow on the board faces negative (black wire)We cut the pre wired resistor off as its not used, leaving about 60mm from led to cut so we have plenty to feed around the ducts.
A judicial blob of Welder glue (the only stuff that sticks to the ducts) under the led and they are fixed to the outside of the ducts.
If you twist the wires before installation they are much easier to manage (and looks neater)
We supply these in a pack of 5 because they are so tiny its easy to lose one.You will only need 4 for a Tiny Whoop, keep one as spare, just in case.
Please note : Pictures do not truly represent the colour or light brightness these have.