High quality super tiny video splitter for diversity transmitters or parallel monitors and recorders.
This 2 channel video splitter which will allow you to share the signal from one single camera to 2 different transmitters.
for example;
- you can use a 1200 and 800mhz transmitters same time for diversity receivers.
- Or you can use it on your ground station for splitting the video to VDR, goggles or maybe a second display for your friends.
You supply your camera and transmitters over its 3 pin servo type connectors (1A max), the 3 wires are GND, Vsupply, Video Signal.
Important!!!
The + trace is a pass-through, meaning that all 3 devices are connected to it through the red wire in the middle of the servo cable. In case any of your devices operate on a different voltage, you should remove the red wire from that connector.
Specifications
Supply Voltage | 3.3 - 18 volt (parallel on 3 ports) |
Video System | 75 ohm with SAG correction |
Operating Temperature | -40 to +105 °C |
Current Consumption | 30mA |
Video input voltage:75R | 1.0Vp-p |
Dimensions( L X W X H) | 3mm X 18mm X 28mm |
Weight | 2.0 gram |