Priced to clear, get one while you still can at the lowest price ever.
This airframe was designed around the same ethos and thinking to that of its much bigger 5 inch brother, Taboo, minimalist design and simplicity.
Everything about this frame is designed around this ethos, its simplicity and clean lines create a super tough and rigid structure and the use of a 1.5mm main base plate, means the least amount of flex in the frame and also the least amount of drag over the skinny arms. The protective motor brackets slot into the main frame simply and easily. These are great both for securing the motor in place but also for preventing the motor wires from getting snagged and damaged in crashes.
The fully adjustable camera gantry, allows for the camera angle to be adjusted from 0 -90 deg. This means you can now lock in absolutely any camera angle you want. The upper camera gantry bolts lock this camera angle down and prevent it from moving.
The FridayFPV Zero is capable of fitting a regular sized Rx, this means you can run any of your regular mini quad Rx's without having to go out and purchase a micro Rx. The ability to run a regular Rx, means you can now fly this frame as a proper outdoor flyer, not worrying about dropping signal if you fly more than 300 meters away from yourself.
Take you micro outdoors and explore.
Take it indoors again and race!
Take your Zero anywhere you want to fly micro!
FridayFPV Zero Technical Specifications
~ This frame is designed for 8.5mm diameter brushed motors
~ 96mm MTM on the diagonal
~ 6.5grams frame weight, including all carbon and stainless steel fasteners
~ 1.5mm main base plate
~ 0 – 90deg. fully adjustable camera angle
~ Protective motor brackets, stop motor wires from getting damaged.
~ All carbon, all stainless steel, no plastic
Zero comes with all the necessary carbon and fasteners you need to complete this monster of a race machine.
Also included in the kit are some really useful anti-vibration securing pads for the flight controller and camera.
Zipties are included for securing the motors in place.
The use of glues (hot glue) and plastic printed parts increases overall frame weight drastically, keeping it light makes it fast!
1 x 1.5mm main base plate
4 x 1mm protective motor brackets
2 x 1mm camera gantry sides
2 x 1mm camera gantry tabs
1 x 1mm main camera plate
Anti-vibration adhesive pads
1 x flight control securing pad (thick)
1 x camera/vtx combo securing pad (thick)
1 x camera/vtx combo securing pad (thin, for cameras with a plastic case)
Fasteners and Misc.
6 x 6mm M2 stainless steel button cap bolts
6 x M2 stainless steel nuts
5 x zipties (for securing motors in place)
Please note, no electronics is included in this kit.
Necessary to complete the build:
~ brushed flight controller
~8.5mm brushed motors (4 off)
~micro camera and vtx or micro camera/vtx combo
~ Rx, this frame is capable of fitting a regular sized Rx
~Battery 1-2s, highest C-rating possible (150-500mAh)
Please note the photos for this product were taken during final prototyping, finish, component flow, fastener colour and selection may change without notification.
Special note : Unless mentioned all items are new and sealed.
All clearance items are sold as seen and not returnable.